FDM 3D Printers
Gigabot 3D Printer
With a build volume of 216,000 cubic centimeters – 30X larger than the leading desktop 3D printer – Gigabot is a tool for problem solvers in the real world. For more information on the Gigabot line of large-scale, industrial, 3D printers
Technology- Fused Filament Fabrication
Build Volume-590 x 600 x 600mm | 212,400 cubic cm (23.2 x 23.6 x 23.6 in)
Layer Resolution- 100-300 Microns (0.004 – 0.012 in)
Nozzle Diameter-Various
Filament Size-2.85mm
Materials-PLA, ABS, thermoplastics melting below 350°C
Artemis 300
The Artemis 300™ Desktop 3D and features a 32 bit controller with WiFi, a huge build volume, auto leveling, and more.
The Artemis 300 features an all new rigid metal frame construction and 350W AC heated bed with aluminum heat spreader. The motion system of the Artemis consists of precision linear bearing rails for rigid precise control and allows for faster rapids. The Artemis moves nearly twice as fast during rapid moves which is made possible by the 32 bit motion control board and powerful stepper drivers. Auto leveling and WiFi control are standard features on this machine.
Tech Specs
290mm D x 500mm Height Maximum Printable X/Y Are
.01mm MAX XY Resolution
Hotend Stain Gage Probe Sensor +/-0.01 accuracy
Minimum Recommended Layer Height w/.5mm nozzle of .1mm
Maximum Recommended Layer Height w/.5mm nozzle of .4mm
Maximum Recommended Printing Speed @.2mm Layer Height 100mm/s
Maximum Usable Printing Speed @.2mm Layer Height 150mm/s
Filament: 1.75mm PLA, ABS, PETG, HIPS, NinjaFlex SemiFlex
Max Heated Bed Temp 120C
Max Travel Speed 400mm/s+
Hotend Temp 280C
Power Requirements 110VAC @ 350 watts (220V AC optional)
Overall Printer Weight: 46lbs
Overall Printer Footprint: 17.5in Depth x 20in Width
Overall Printer Height: 41.5in
Rostock MAX v2 (upgraded to a V3.2)
The Rostock MAX V2 features a large build volume at 19.7 x 19.7 x 38.1 cm and a resolution of 100 microns. This American made 3D printer has a large community of builders and is suitable for first time builders and enthusiasts alike. Due to its open source nature, the Rostock MAX V2 has large capacity for modification.
Tech Specs
PRINTER TYPE: FDM
MATERIAL: PLA, ABS
BUILD VOLUME: 21 x 21 x 38.1 cm
MIN LAYER HEIGHT: 12.5
OPEN SOURCE: Hardware & software
CAN YOU USE 3RD PARTY MATERIAL? Yes